Designing and owning the firmware at the heart of magnetostrictive linear position sensors is the core of this hands-on, component-level role. The successful candidate will write the code that generates the interrogation pulse, detects and times the return strain wave, converts time-of-flight into a calibrated position value, and delivers that value to the customer's machine over industrial networks and analog outputs accurately, deterministically, and reliably, in electrically demanding environments. This position also serves as the senior firmware technical resource for the Cary R&D organization, setting architecture direction for new sensor platforms, raising the rigor of the firmware development lifecycle, mentoring engineers, and collaborating with engineering teams in Ludenscheid, Germany, and Hyderabad, India.
Responsibilities
Own the firmware architecture for new and derivative magnetostrictive linear displacement transducer platforms, including task partitioning, real-time timing budgets, memory budgets, and interface definition, and document that architecture so the design survives beyond any one engineer
Design, implement, and optimize the core measurement firmware: interrogation pulse generation, return-signal detection and threshold management, high-resolution time-of-flight capture, time-to-position conversion, multi-magnet discrimination, and output update-rate management
Develop and tune the digital signal processing chain, including filtering, sliding DFT and Goertzel-class algorithms, phase optimization, interpolation, and averaging strategies, balancing resolution, repeatability, latency, and noise immunity, and quantifying those trade-offs with data
Implement temperature compensation, linearity correction, calibration storage, and end-of-line calibration routines, working with test engineering so that the production tester and the sensor firmware share one calibration model
Develop and validate firmware for analog output variants, including voltage (0-10 V, plus or minus 10 V) and current (4-20 mA) outputs, covering DAC drive, span and zero scaling and configuration, loop compliance, output slew and settling behavior, and defined fault and error output states
Develop and validate firmware for digital and networked output variants, including CANbus-based protocols (CANopen, SAE J1939), Industrial Ethernet (EtherCAT, PROFINET, EtherNet/IP), IO-Link, SSI, and serial and Modbus interfaces, in accordance with the applicable protocol specification and device profile
Integrate and maintain third-party and multiprotocol communication stacks and modules, such as Hilscher netX-class devices, including host interface implementation, process data and object dictionary mapping, and device description file generation (EDS, GSDML, ESI)
Develop and maintain the driver and board support layer directly from silicon documentation: clock and power configuration, timers and capture units, DMA, ADC and DAC, comparators, SPI, I2C, UART, QSPI, and GPIO, in both bare-metal and RTOS-based designs on ARM Cortex-M or comparable microcontrollers and DSPs
Millions of jobs, with real people getting hired every day
200,000+
New jobs added daily
7,000,000+
Verified job listings
1,000,000+
Tailored applications submitted
Design and maintain the bootloader and field firmware update path, including image integrity verification, version reporting, failure recovery and rollback, and non-volatile memory management with wear and power-loss considerations
Implement device diagnostics, self-test, plausibility checking, watchdog strategy, and defined safe-state behavior, so that a sensor fault is detectable and actionable by the customer's control system
Partner with electrical engineering from concept through release: participate in component selection and schematic and layout review, advocate for testability and debug access, and lead firmware and hardware bring-up on new printed circuit board assemblies
Troubleshoot and debug embedded systems at the firmware and hardware boundary using oscilloscopes, logic and protocol analyzers, JTAG and SWD debuggers, and bus sniffers, driving issues to an evidenced root cause rather than a workaround
Own firmware verification and validation: write requirement-linked test specifications, build unit and hardware-in-the-loop regression suites, and execute regression testing as a required condition of every firmware release under the ECO process
Support product qualification and design validation, including EMC (ESD, EFT and burst, surge, radiated and conducted immunity), thermal, shock and vibration, and magnet compatibility testing, and resolve firmware-attributable findings, including immunity and recovery behavior
Create documentation, including software requirements and design specifications, interface control documents, test specifications and reports, release notes, and change impact analyses that explicitly state risk, scope of regression, and customer impact
Serve as the firmware technical authority in design reviews and phase-gate reviews, review the code and designs of peers, and mentor mid-level and junior engineers in embedded design practice
Engage proactively with cross-functional, inter-departmental, and cross-site teams, including the Ludenscheid and Hyderabad engineering teams, to deliver technical support and to develop shared platforms and reusable firmware components
Assist production, test, and sustaining engineers in addressing firmware challenges; resolve field and factory issues, and help improve tester first-pass yield, tester efficiency, and firmware-driven product cost and cycle time
Evaluate emerging microcontrollers, DSPs, algorithms, protocols, and toolchains; propose and prototype innovations that create measurable competitive advantage; and contribute to invention disclosures and patent filings
Know and apply the division's quality policy and procedures of ISO 9001 as it relates to area of responsibility and the organization
Follow all standard-operating procedures as prescribed and notify appropriate personnel of any non-conformance
Requirements
Applicants must be legally authorized to work in the United States
Bachelor of Science degree in Electrical Engineering, Computer Engineering, Computer Science, or a closely related engineering discipline. Equivalent demonstrated experience will be considered.
Minimum 8 years of professional embedded firmware development experience at the component level - firmware written for a specific microcontroller and a specific circuit, as distinct from application software running on a general-purpose operating system
Expert-level proficiency in C, with working proficiency in C++; comfortable working at the register level and reading assembly when required
Demonstrated experience delivering released production firmware on 32-bit microcontrollers (ARM Cortex-M or equivalent) in both bare-metal and RTOS environments, including interrupt-driven, real-time deterministic designs
Hands-on development experience with CANbus, including at least one higher-layer protocol such as CANopen or SAE J1939
Hands-on development experience with at least one Industrial Ethernet protocol, such as EtherCAT, PROFINET, or EtherNet/IP
Hands-on experience implementing analog output interfaces, both voltage and 4-20 mA current loop, including DAC configuration, scaling, calibration, and fault-state definition
Fluent use of laboratory instrumentation for firmware debug, including oscilloscope, logic analyzer, protocol analyzer, JTAG or SWD debugger, and bench power and signal sources
Ability to read and interpret schematics, timing diagrams, and component data sheets, and to work productively with electrical engineers on hardware and firmware trade-offs
Strong written and verbal communication skills; able to author a specification or an analysis that another engineer can act on, and to defend a technical position with data
Ability to make sound independent technical decisions and to exercise sound judgment to solve problems and make recommendations
Must be able to comprehend written and verbal instructions and technical documentation
Willingness and ability to travel domestically and internationally, up to approximately 15 percent
Nice to have:
Master of Science degree in Electrical Engineering, Computer Engineering, or a related discipline
Experience developing firmware for sensors or precision measurement instruments, such as magnetostrictive, magnetic, inductive, encoder, LVDT, ultrasonic, load cell, or force and torque devices
Prior experience taking an Industrial Ethernet or fieldbus device through conformance testing and formal certification
Experience integrating multiprotocol communication modules or stacks, such as Hilscher netX, and generating and validating device description files
IO-Link, SSI, Modbus, or PROFIBUS implementation experience
Experience with functional safety development (IEC 61508, ISO 13849, or ISO 26262) or with safety-rated sensor variants
Working knowledge of EMC design and test, and of firmware techniques that improve immunity and recovery behavior
While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work is performed in an office and engineering laboratory environment; the employee will work with energized electronic assemblies and laboratory test equipment and is expected to follow all applicable safety procedures.
Benefits
Competitive medical, dental, and vision plans for you and your family
A progressive 401(k) with a 75% company match on employee contributions up to 6%
Generous paid time off and company-paid holidays
Ongoing employee development opportunities to help you advance your skills and career
About the Company
Temposonics is a leading innovator in advanced sensing technologies, delivering high-precision position and speed measurement solutions for automation and safety-critical systems. Since April 2021, Temposonics has been part of Amphenol Corporation (NYSE: APH), one of the world’s largest manufacturers of interconnect products. Their cutting-edge sensors and transmitters help drive performance and minimize downtime in a wide range of industrial, mobile hydraulics, and process technology applications. With a continually expanding product portfolio and a strong commitment to regional customer support, they work closely with clients to deliver customized solutions that boost productivity and operational success. Their success is rooted in outstanding product quality, hands-on expertise, and a passion for innovation, investing heavily in research, development, and production to create next-generation sensor systems that meet evolving industry needs.
