About This Role
Working as a Mechanic Tech in a high-production mechanic shop, you will perform diagnostic repair or maintenance on customer vehicles. This position supports the mechanic shop and reports to the Mechanic Shop or a designated manager.
Responsibilities
- Operate A/C and heater systems and recognize if the system is cooling or not; perform basic system checks such as power to compressor, visually inspect condenser, and belt tension; identify Freon and oil leaks
- Identify components of the brake system; visually inspect brakes; identify irregular noises and leaks; perform simple system tests; measure lining, drums, rotors, and cams; road test for proper operation; check fluid level; adjust service and park brakes and perform repair
- Visually inspect electrical charging system batteries, clean connections, check condition of belts, test batteries, check alternator mounting and pulley, replace and adjust belts, and perform basic charging system check
- Lubricate clutch bearing, linkage, shafts, and cables; identify proper clutch operation
- Check and adjust cooling system coolant levels and antifreezes; visually inspect system for leaks; make minor repairs such as hose replacements, fan shrouds, and fittings; pressure test, flush, and refill systems
- Inspect and test starting/cranking system batteries, cables, and motor; clean battery cables, connections, and starter; check, charge, and replace batteries; repair or replace defective cables; read wiring schematics
- Repair minor wiring problems; replace bulbs, lenses, and simple light assemblies; adjust or replace sealed beams; install or replace accessories (heated mirrors, fans, spotlights, etc.)
- Inspect drive axle housings for leaks, change oil and filter, and clean breathers
- Lubricate driveline and inspect components for wear or damage
- Check and adjust gas engine oil levels; identify unusual noises and oil leaks
- Replace and prime fuel filter; check gas and diesel fuel system components such as fuel lines, pickup tubes, and return lines for proper integrity and condition
- Perform preventive maintenance including proper lube techniques, minimal tire inspection, brake check and applied stroke, battery check, under vehicle check and loose components, and initial fault code identification
- Perform air pressure checks; check tread depth; identify tires that need to be changed or repaired; perform tire checks; replace tire and wheel assemblies; mount, dismount, and rotate tires
- Track and record vehicle information following department processes
- Assist in overall general shop duties such as cleaning, driving, organizing vehicle parking and staging
- Provide prompt and courteous service to internal and external customers
- Maintain a professional appearance and neat work environment
