About the role
Job Description:
The Supervisor position requires 5 years of experience as a supervisor in repair and maintenance efforts onboard U.S. Navy ships in the Trade Skill they are supervising and On-Site Supervisors must reflect the same (3 years) experience, training, and qualifications, as the Tradesperson they are supervising. These periods of experience cannot overlap.
Required Skills and Experiences:
Supervisors shall possess 5 years experience supervising the following requirements:
Abrasive Blaster Typical Trade Task
a. Large scale abrasive blast removal of preservation coatings (e.g., high solids and non high solids paints) of interior and exterior submarine tanks (e.g interior storage tanks or external main ballast tanks).
b. Small and Large Scale abrasive blast surface preparation of external hull, free flood and superstructure surfaces.
c. Blast Equipment staging and set up.
d. Blast Media recovery.
e. Small area vacuum blasting of submarine hull or interior surfaces in preparation for painting.
Abrasive Blaster Trade Skill Requirements
a. Each Blaster shall have a minimum of two (2) years of experience performing abrasive blasting operations on/in commercial ship or U.S. Navy ships/submarines.
b. Each Blaster shall be trained and qualified to work with lead, cadmium, chromic acid/chromium, and arsenic as well as mixed solvents.
c. Each Blaster shall be certified in accordance with SSPC C-7 or NAVSEA-approved equivalent (Contractor must specify and provide).
d. Each Blaster shall be qualified in surface preparation and application of coatings of critically coated areas per NSTM S9086-VD-STM-030/Ch-631 V3R1 - Preservation of Ships in Service. Blasters shall also be familiar with the requirements for standards in SSPC-1, 5 and 10.
e. Each Blaster shall be trained at proficient in all aspects of blasting including the proper selection, control and maintenance of blasting and application equipment.
f. Each Blaster shall be trained and proficient to perform hazardous large scale blasting operations, in confined and awkward spaces, fully outfitted in coverall and positive pressure air fed blast hoods, and to work safely in dusty and darkened tanks and voids.
g. Each Blaster shall have appropriate medical stressors to allow working with "black diamond" compounds. As a minimum, this will include 29 CFR 1910 medical exams for 121 Beryllium, 124 Cadmium, 133 Chromic acid/Chromium, 161 Lead, M112 Arsenic, 208 Cobalt, 603 Mixed Solvents, 172 Nickel, and 187 Silica (chrystalline).
h. Each Blaster shall be trained and qualified to select and wear respirator equipment (e.g., negative pressure respirators, air fed respirators and air fed blast hoods) where required.
i. Each Blaster shall be trained and qualified to wear safety harnesses and work from scaffolds/platforms or other awkward surfaces where required.
Degree Requirements:
- Must be a U.S. citizen.
Millions of jobs, with real people getting hired every day
Questions, answered
Click "Apply with JobAssist" – we tailor your resume and application to this role and submit it for your approval.
Yes. This role at ORBIS Inc was screened before publishing – we confirmed the employer before listing it.
The employer didn't disclose a salary range for this listing. JobAssist shows pay whenever it's available.
This position can be done from anywhere, with no in-office requirement.
Yes – every application is tailored from your profile and this job's requirements, and you can review and edit before it's sent.